A514 Grade H, steel plate A514 Grade H is for high yield strength, quenched and tempered alloy steel plate of structural quality in thickness of 50mm and under intended primarily for use in welded bridges and other structures. The max thickness of A514 Grade H is 50mm. in the heat treatment, A514 Grade H shall be heat treatment by the mill to conform to the tensile and hardness requirements by heating to not less 900 degree and quenching in water or oil
A514 Grade Q,ASTM ,A514 Grade Q steel plate A514 Grade Q is for high yield strength, quenched and tempered alloy steel plate of structural quality in thickness of 150mm and under intended primarily for use in welded bridges and other structures. The max thickness of A514 Grade Q is 150mm. in the heat treatment, A514 Grade Q shall be heat treatment by the mill to conform to the tensile and hardness requirements by heating to not less 900 degree and quenching in water or oil
A514 is a high strength low alloy (HSLA) material grade used in structural applications requiring superior strength. A514 has a minimum yield strength of 100ksi up to 2.5 thick, and a 90ksi minimum yield strength from 2.5 to 8 thick. Standard stock grades are B, H, F, Q, S, & E, with alternative grades available upon request.
ASTM A519 4130 Pipes 4130 Tubing 4130 Tube- SP MetalASTM A519 4130 Pipes Packing:Plastic plugs in both ends, bundles of max. 3,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper and sackcloth with several steel strips ASTM A519 4130 Pipes Delivery Condition:Annealed (A), Bright Annealing, Normalized (N), Stress Relief Or Finish Anneal (SR), Quenched and Tempered (Q+T), etc.
Alro SteelAlro stocks grade B, H, F & Q and pattern sizes of A514 Plate in 1/4 - 6. ASTM A-572 Grade 50 This high strength, low alloy steel plate offers an optimum combination of strength, weldability and notch toughness with economy.
ASTM A387 GRADES :Grade A , Grade B , Grade C , Grade D. Read More ASTM A514 GRADES :ASTM A514 GRADE A, ASTM A514 GRADE B, ASTM A514 GRADE E, ASTM A514 GRADE F, ASTM A514 GRADE H, ASTM A514 GRADE P, ASTM A514 GRADE Q, ASTM A514 GRADE S.
MetalsDepot® - A514 Plate T1 Steel Plate - Buy Online!A-514 / T1 Steel Plate. A514 Steel Plate aka T1 steel plate is a high strength steel plate designed for applications requiring optimal impact and abrasive resistance. A514 T1 steel plate provides a high yield strength of 100 ksi min. with good weldability and toughness. Designed for a wide range of structural uses, as well as for machinery and equipment, A514 T1 Steel Plate offers optimum in strength,
Plate and Sheet Harbor SteelUsed for structural applications, carbon steel plate and sheet in both hot rolled, pickled & oiled, and cold rolled are produced from ingots and slabs made by the continuous cast, the basic-oxygen, or electric furnace processes. This material is readily formed and welded using conventional methods.
HY-80 or HY-100 per MIL-S-16216, A514 Grade B or P, AISI 4130 or 8620, API X-70 or X-80 (A) Must have the minimum of one or more of the following:0.50% Ni, 0.30% Cr, or 0.20% Mo. WIRE COMPOSITION %C %Mn %Si %Ni Requirements - AWS ER100S-G (A) Typical Results 0.10 1.55 0.57 0.88 %Mo %Cr %S %P Requirements - AWS ER100S-G (A) (A) ASTM A514 / T1 Steel Plate - Grade B, E, F, H, Q, S Commonly used as structural steel in cranes or large heavy-load machines, A514 offers high strength with weldable, machinable properties. Also referred to as T-1 steel. Quenched and tempered for increased strength. Available in eight grades:B, S, H, Q, E, F, A and P. Available in heavy plate thicknesses (3-inches or greater).
Contact us